MAG 254 BOX EMULATOR FOR MAC MANUAL
MAG 254 BOX EMULATOR FOR MAC PASSWORD
MAG 254 BOX EMULATOR FOR MAC TV

MAG 254 BOX EMULATOR FOR MAC PASSWORD

Password information is stored in User Settings (for resetting - System settings / Clear user data).

Delete (forget) the wireless network from the STB list and refind/reconnect.

Check that Authentication Mode, Encryption parameters on both sides of the connection (STB and at Wi-Fi access point) are the same.

If possible, check whether STB is able to connect to another access point (to another WiFi-device).

If the wireless network is detected, but you can not connect to the network.

Perhaps, it is necessary to solve the access problem on the network side (WiFi access point).

If STB does not detect the wireless network, check if the wireless network is detected by other devices (for example, by smartphone).

If STB does not detect external WiFi adapter (when connecting adapter to STB appropriate message is displayed), make sure the module is working (check up on other devices), and also in module compatibility with this type of set-top box - see Wireless Wi-Fi access.

If the link status is 'Down', connection to Wi-Fi access point is not established:

In the status window, the link must be 'UP' ( Network / Wireless (Wi-Fi) / Network info).

If you have a wireless WiFi connection:.

MAG 254 BOX EMULATOR FOR MAC MANUAL

If manual settings are used check correctness of access parameters (IP address, Network mask, Gateway).

If parameters are not set, you need to find out and eliminate the cause of the autoconfiguration error (restart STB, check network device settings and (or) contact network service provider)

If autoconfiguration (DHCP) is used, the correct values must be set for the parameters IP address, Network mask, Gateway (see Network / Wired (Ethernet) / Network info).

The cable is damaged, connectors are not installed properly, programmatically disconnection on the opposite side, etc.

Possible causes of physical disconnection: If LED is not lit and (or) status of the link is 'Down'. The link status must be Up (see Network / Wired (Ethernet) / Network info).

check that the LED indicator on the Ethernet socket is lighting.

If it possible, check for network (Internet) connection on other home devices (computer, smartphone, etc.).

MAG 254 BOX EMULATOR FOR MAC TV

You have not switched the TV to appropriate video input (digital HDMI or analog RCA).

Wrong video output mode (PAL / NTSC) is selected o n STB.

To operate the video output, you must use the SD modeВ»:

If the blue window is displayed on a black TV screen with the message 'This video output does not work in HD mode.

If there is no picture on the TV screen, video mode on TV and STB may not be matched - enter Bootloader menu - off/on STB power and press Menu key on the remote control (the screen remains black) and change the STB video mode by pressing F1 key.

On TV: СЃheck socket ( HDMI / RCA) to which the cable is plugged and make sure that the setting of the source is correct.

Ensure that cable is in good condition.

Make sure that the cable is securely connected on both sides (TV and STB).

Problems with the video interface cable (HDMI, RCA):.

Check the power supply for parameters specified in the STB user manual.

STB power supply unit is not working properly or has not suitable parameters (this case, STB LED can be lit):.

Make sure that both devices (STB and TV) are connected to the power supply.

No power supply at Set-Top Box or TV or one of the devices (STB or TV) does not work properly.

Mag 254 box emulator for mac